96-Layer 3D TLC Reaches Embedded & Industrial NVMe SSDs: Transcend Reveals MTE662T
Though, as always, it takes some time for newer technologies to filter down into the conservative embedded/industrial market, the time has finally come for 96-layer 3D TLC NAND. SSD maker Transcend recently introduced its high-performance MTE662T SSD, one of the world’s first 96-layer 3D TLC-based NVMe drives aimed at commercial and industrial environments. And with sequential read speeds of up to 3400 MB/s, the drive is among the fastest in the segment.
When it comes to SSDs for applications that work 24/7 and/or in harsh environments, predictability and reliability are two things that matter the most, so the devices use appropriate components, are tailored for a particular use case, and have to pass rigorous tests. Transcend’s MTE662T M.2-2280 SSD is designed for embedded or ‘mild’ industrial applications, so it can handle operating temperatures between 0ºC and 70ºC for prolonged periods, can survive 5% ~ 95% RH non-condensing humidity, and endure 2.17 G (peak to peak) vibration with a 10 Hz ~ 700 Hz frequency.
The Transcend MTE662T carries 256 GB, 512 GB or 1 TB of 96-layer 3D TLC BiCS4 memory from Toshiba. The SSD is controlled by by an undisclosed high-end controller with eight NAND channels that supports NVMe 1.3 feature set, an LDPC-based ECC as well as DRAM caching. As far as performance is concerned, the drive promises up to 3400 MB/s sequential read speeds, up to 2300 MB/s sequential write speeds (when pSLC cache is used), as well as a peak read/write random IOPS rating of 340K/355K.
When it comes to endurance and reliability levels, Transcend’s MTE662T SSDs can handle from 550 TB to 2,0 TB written over a three-year warranty period, depending on the drive's capacity. This is not a particularly high rating, but far not all embedded and commercial applications are write intensive. As for MTBF, Transcend has rated the drive for 3,000,000 hours.
|Transcend's MTE662T SSDs|
|Capacity||256 GB||512 GB||1 TB|
8 NAND channels
|NAND Flash||96-Layer BiCS4 3D TLC NAND|
|Form-Factor, Interface, Protocol||M.2-2280, PCIe 3.0 x4, NVMe 1.3|
|Sequential Read||3200 MB/s||3400 MB/s||3400 MB/s|
|Sequential Write||1300 MB/s||2300 MB/s||1800 MB/s|
|Random Read IOPS||190K IOPS||340K IOPS||305K IOPS|
|Random Write IOPS||320K IOPS||355K IOPS||350K IOPS|
|DRAM Buffer||Yes, capacity unknown|
|TCG Opal Encryption||?|
|Power Consumption||Sleep: 1 W|
Operation: 3.3 W
|Operating Temperature||0°C (32°F) ~ 70°C (158°F)|
|Storage Temperature||-40°C (-40°F) ~ 85°C (185°F)|
|Humidity||5% ~ 95% RH, non condensing|
|Shock||1500 G, 0.5 ms, 3 axis|
|Operating Vibration||2.17 G (peak-to-peak), 10 Hz ~ 700 Hz (frequency)|
|TBW||550 TB||1,100 TB||2,0 TB|
Transcend will start sales of the MTE662T SSD in February. Exact prices will depend on the volume ordered and other factors.
- Transcend Launches New PCIe M.2 SSDs: The MTE850 Series
- Transcend Introduces Extreme Temperature DDR4 SO-DIMMs
- ADATA Launches ISSS314 and IM2P3388 Industrial SSDs: 3D NAND, Extreme Temps
- Transcend Announces SuperMLC: Pseudo-SLC SSDs For Industrial Market